Exaco Exhaust Fan & Intake Shutter Vent

Move and refresh the stagnant air in your greenhouse with the Exaco Exhaust Fan to create a healthier and more productive growing environment. This ventilation system is able to make a complete change of air in 1 to 3 minutes in summer to keep temperatures in the greenhouse at a reasonable level.

The Exaco Exhaust Fan is a greenhouse accessory designed to allow airflow which ultimately is important to create the best growing environment for healthy plants. It regulates temperature and allows your plants to benefit from adequate air circulation. A vital way of maintaining the good health of plants depends upon proper air circulation. Allowing the drifting of hot air out of the greenhouse, this Exaco Exhaust Fan helps lower unwanted humidity and letting the cooler air pass in.

When the hot air in your greenhouse rises too high above the outside temperature, your plants will barely survive or die, the exhaust fan is the best cooling option for your greenhouse, easy to install and inexpensive to maintain.

It keeps the air moving throughout the entire greenhouse making sure it reaches all the plants, keeping them alive and equally healthy. 

The exhaust fan is best purchased with the Intake shutter fan to maximize its effect, as the exhaust fan gets rid of warm air in the greenhouse, the intake vent allows for proper circulation of fresh air in the greenhouse.

Features & Benefits of Exaco Exhaust Fan 

• Anodized construction reduces rust and corrosion
• Material: Anodized aluminum
• Allows for cooler fresh air to travel across the entire structure
• Gives your greenhouse maximum ventilation and prevents and controls pest
• Aids pollination
• Easy installation and requires minimum maintenance 
• Usually positioned in a high location in the back wall
• Pre-wired with 9 ft plug-in cord, 110v
• Available sizes for Exhaust Fan:
  • 12in: Opening needed 12.25″ x 12.25″
  • 16in: Opening needed 16.25″ x 16.25″
  • 20in: Opening needed 20.25″ x 20.25″
• Optional Intake Shutter Vent:
  • Needs to be positioned lower in order to suck in cool air (highest position in the lowest panel on the opposite wall from exhaust fan)
  • Available sizes for intake shutter vent:
    • 16in: Opening needed 16.25″ x 16.25″
    • 20in: Opening needed 20.25″ x 20.25″
    • 24in: Opening needed 24.25″ x 24.25″
• Optional Thermostat (BioGreen Digital Thermostat): 
  • Specifically designed for use in greenhouses
  • Comes with 43″ power cord with 3-prong plug
  • Function1: operate fans on hot days
  • Function 2: operate heater during cold days:
  • Temperature range: -50 to 100º F (comes with 5-foot long temperature sensor cord)
  • Works with appliances up to 1500 watt
  • Water-resistant
• Made in Belgium